LeHaM.org Forums

Welcome to the LeHaM.org forums, here you can find tutorials, information and get help on any mods / Projects, console repair and home theater set-ups.
 
HomeCalendarFAQSearchRegisterLog inMain Site
Latest topics
» PS2-How to Install a Cooling Fan in a PS2
Sat Aug 06, 2011 12:44 pm by Admin

» Fat ps2 Repair - BGA reflow
Sat Aug 06, 2011 12:42 pm by Admin

» Game Cube -- XenoGC Short Wire Installation guide
Sat Aug 06, 2011 12:34 pm by Admin

» Sega Dreamcast--VGA Mod
Sat Aug 06, 2011 12:08 pm by Admin

» How to Clean the Lens and Mirrors of Your Projection TV
Wed Aug 03, 2011 3:48 am by Admin

» Soundproofing for cheap
Wed Aug 03, 2011 3:46 am by Admin

» Speaker Placement: Ported Versus Sealed
Wed Aug 03, 2011 3:44 am by Admin

» Backlight your TV
Wed Aug 03, 2011 3:37 am by Admin

» 10 DIY Home Theater Tips
Wed Aug 03, 2011 3:31 am by Admin

Navigation
 Portal
 Index
 Memberlist
 Profile
 FAQ
 Search
Respected Sites
free forum
Please Donate

Share | 
 

 Upgrade 360 slim hdd for free*

View previous topic View next topic Go down 
AuthorMessage
Admin
Admin


Posts : 76
Join date : 2011-06-28

PostSubject: Upgrade 360 slim hdd for free*   Tue Jul 05, 2011 2:42 pm


It turns out that the connector for the new hard drive on the Xbox 360 slim model is a standard SATA data and power port. I feel like this has to be at least somewhat intentional, although maybe Microsoft was just that desperate to save space in the new model.

What this means is that if you get a hold of an old Xbox 360 hard drive, you can actually take the hard drive out of its enclosure and connect it to the new Xbox 360 slim.

LeHaM.org is not responsible for what may happen to your Xbox 360 Slim.
•Tools Needed

Xbox 360 Slim (obviously)
Torx 6 and Torx 10
Xbox 360 HDD (SATA)
Flathead Screwdriver (for removal of HDD slot)

Step 1:

Disassemble Xbox 360 HDD, and get to the SATA HDD that lies within. If you do not know how, you can find a tutorial HERE

Step 2:

Remove the cover of the Xbox 360 Slim HDD cover. I'm pretty sure it just slides off, but you may use a flathead screwdriver.

Step 3:

Insert your HDD from "Step 1" into the slot in "Step 2." You need to have the top of the HDD facing the top of the Xbox 360 Slim. Be sure to slide in, and holding it with your fingers to as low as you can go. This may damage the slot if you dropped from too high.
Try and get as close as you can to the bottom of the slot.


Step 4:

Push the HDD in gently without putting too much force to break anything. If you were to damage this, you may not be able to use an Xbox HDD of any kind. You may be able to get a replacement though if anything unexpected, and bad happens. The HDD will be a little wobbly, just make sure it doesn't move too much to slip out.

Step 5:

Pretty obvious, but put the HDD case slider back on.



NOTE** YOU CAN NOW BUY CASES WHICH SLIDE STRIGHT INTO THE 360 SLIM, THEY HOLD THE HDD IN TIGHT.



[You must be registered and logged in to see this link.]
Back to top Go down
http://leham-forum.freegametalk.com
 
Upgrade 360 slim hdd for free*
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
LeHaM.org Forums :: Console Mods :: Xbox 360 Modding-
Jump to: