LeHaM.org Forums

Welcome to the LeHaM.org forums, here you can find tutorials, information and get help on any mods / Projects, console repair and home theater set-ups.
 
HomeCalendarFAQSearchRegisterLog inMain Site
Latest topics
» PS2-How to Install a Cooling Fan in a PS2
Sat Aug 06, 2011 12:44 pm by Admin

» Fat ps2 Repair - BGA reflow
Sat Aug 06, 2011 12:42 pm by Admin

» Game Cube -- XenoGC Short Wire Installation guide
Sat Aug 06, 2011 12:34 pm by Admin

» Sega Dreamcast--VGA Mod
Sat Aug 06, 2011 12:08 pm by Admin

» How to Clean the Lens and Mirrors of Your Projection TV
Wed Aug 03, 2011 3:48 am by Admin

» Soundproofing for cheap
Wed Aug 03, 2011 3:46 am by Admin

» Speaker Placement: Ported Versus Sealed
Wed Aug 03, 2011 3:44 am by Admin

» Backlight your TV
Wed Aug 03, 2011 3:37 am by Admin

» 10 DIY Home Theater Tips
Wed Aug 03, 2011 3:31 am by Admin

Navigation
 Portal
 Index
 Memberlist
 Profile
 FAQ
 Search
Respected Sites
free forum
Please Donate

Share | 
 

 Make your own xbox 1 memory card

View previous topic View next topic Go down 
AuthorMessage
Admin
Admin


Posts : 76
Join date : 2011-06-28

PostSubject: Make your own xbox 1 memory card   Wed Aug 03, 2011 2:06 am

By using this tutorial you will be bale to make your own xbox memory card using a USB thumb drive. Plus its fully reversable without affecting the thumb drive itself 'What you will need:

- 1xUSB thumb drive. (I used an extremely cheap 64mb drive. 64 mb is more than enough space for xbox too)

- 1xSoldering Iron

- 1xSolder (well deerr you may say hehe)

- Some electrical tape and/orHeatshrink

- 1x breakaway cable (just the part that plugs into the xbox itself, BEWARE:It is about to be butchered so use a spare one)

- 1x USB male to female extension cord.(most come with the actual thumb drive)



Now get the usb extension cable, cut that in half, it can be closer to the female end as that is the part we will be using. Now inside the cable you will see 4 coloured wires, green, black, red and white, strip each wire but make sure you know which colour is which and dont mix them up, or let each wire touch.



Now do the same with the breakaway cable, but you will notice there is an extra yellow wire, well that doesnt matter, just ignore that one. Now solder all the wires together, (ie red to red, white to white etc)And wrap each connected wire in its own electrical tape(or heatshrink) and then wrap them all together too, so its like one big cable again. It is critical that the connections are solid, and that different coloured wires do not touch each other. It will not work at all if they do.



You can now plug your usb thumb drive into your xbox, and it will automatically format it for you. Your actual memory card is now finished. You can use it just as you would a standard memorey card.

Back to top Go down
http://leham-forum.freegametalk.com
 
Make your own xbox 1 memory card
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
LeHaM.org Forums :: Console Mods :: Xbox Modding-
Jump to: